Help Centre
One Tape, Four Readings
Last updated: September 12, 2026
In the workshop we measure a wheel before anything else is discussed. Two minutes with a tape avoids a week of emails about a rim that does not sit where the owner expects.
For most modern cars the figure lands between 360 mm and 380 mm.
The Workshop Method
We take the reading across the rim, with the wheels straight and the wheel centred.
- Straighten the front wheels.
- Centre the steering wheel.
- Lay the tape across the centre hub, outer edge to outer edge.
- Read millimetres and note it on the build sheet.
We repeat the reading once. A difference between two readings means the tape was not across the centre.
Sizes We See
Compact sports wheels arrive around 340–350 mm, hatchbacks near 360 mm, and most saloons between 365 and 370 mm. Larger saloons and SUVs come in near 380 mm, and vans or trucks at 390–400 mm.
| Diameter | Inches | Vehicle type |
|---|---|---|
| 340–350 mm | 13.4–13.8 in | Compact sports |
| 360 mm | 14.2 in | Hatchback |
| 365–370 mm | 14.4–14.6 in | Modern saloon |
| 380 mm | 15.0 in | Large saloon / SUV |
| 390–400 mm | 15.4–15.8 in | Van / truck |
What the Size Does
A smaller rim turns the car more for the same hand travel, which feels sharper. A larger rim asks for less effort and feels calmer at low speed.
The rack does not change, so the effect is entirely in the input.
Changing the Size Safely
A different diameter is possible only where the spline, hub and airbag mounting are right for the car. A smaller rim may cover part of the instrument cluster; a larger one may interfere with the driver's legs.
Our default is to keep the original diameter and change the covering, the thickness and the rim shape, which changes the feel more than a small size step.
Frequently Asked Questions
How does the workshop measure a wheel?
Outer edge to outer edge across the centre of the rim, in millimetres, with the wheels straight.
What is a standard diameter?
Most modern cars sit between 360 mm and 380 mm.
Why measure twice?
Two readings that disagree usually mean the tape was not square across the centre.
Can a different size be fitted?
Only where spline, hub and airbag mounting match, and where the cluster and legroom still work.
Does the airbag matter?
Yes. It mounts to the centre hub, so fitment is confirmed before production and the original core is reused where needed.
What should I order if unsure?
Send the measurement, the chassis number and photographs; we confirm the size before the build starts.